NSN 5305-00-925-7860
High Torque Screw
Between 0.949 inches and 0.979 inches fastener length, flat countersunk head style, between 0.280 inches and 0.337 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS1202-11 for national stock number 5305009257860.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-925-7860.
-
MPN or Model
NAS1202-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.949 inches and 0.979 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.280 inches and 0.337 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.164 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unc -
Specification Data
80205-nas1202-80 professional/industrial association standard
More from these suppliers
- 5305-00-007-0287 MPN NAS1131E88PClose Tolerance Screw
- 5305-00-445-8743 MPN NAS1134-14Close Tolerance Screw
- 5305-00-431-7114 MPN NAS1151-5Close Tolerance Screw
- 5305-00-899-2720 MPN NAS1189-5P12WSocket Head Cap Screw
- 5305-01-191-3106 MPN NAS1221-08-5TMachine Screw
- 5306-00-602-0775 MPN NAS1003-1AMachine Bolt
- 5306-00-816-5156 MPN NAS1120-96DShear Bolt
- 5306-00-826-3027 MPN NAS1005-6Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-925-7860 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1202-11 | Eriks Southwest Inc |
NAS1202-11 | Apcom Inc |
NAS1202-11 | Nor-cal Supply Co.inc. |
NAS1202-11 | National Aerospace Standards |
NAS1202-11 | Hi-shear Corporation |
NAS1202-11 | Sps Technologies, Llc |
NAS1202-11 | Lisi Aerospace Canada Corp |
NAS1202-11 | Sps Technologies, Llc |
NAS1202-11 | F And C Sales Inc |
NAS1202-11 | Collins Engineering Corp |
NAS1202-11 | Durham Aircraft Service Inc |
NAS1202-11 | Air Industries Co Inc |