NSN 5305-00-929-9212
High Torque Screw
Two spring loaded balls in shank as self retaining feature.
Manufacturer part number 7823864-1-06-25 for national stock number 5305009299212.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-929-9212.
-
MPN or Model
7823864-1-06-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.339 inches and 0.386 inches -
Fastener Length
Between 1.921 inches and 1.948 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.194 inches and 0.204 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches second hole and 0.116 inches second hole -
Internal Drive Style
Slot -
Thread Diameter
0.375 inches -
Grip Length
Between 1.562 inches and 1.582 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.790 inches second hole and 1.837 inches second hole -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Fs251, fscm 8827 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-677-8135 MPN 32-19275-13Hinge Flap Pin
- 1560-00-688-7632 MPN 32-32065-160Aircraft Skin
- 1560-01-183-0185 MPN 32-17014-5Airfoil Rib
- 1680-01-327-3063 MPN 2550857-503Actuator Bumper
- 1560-01-079-2035 MPN 32-32054-117Door Seal Block
- 1560-01-088-3016 MPN 32-33259-39Frame Assembly Filler
- 1560-01-250-2250 MPN 5819585-503Special Purpose Thermal Insulation
- 5305-00-173-0100 MPN AS108-04-43Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-929-9212 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7823864-1-06-25 | Boeing Company, The |
7823864-1-06-25 | Kitco, Llc |
7823864-1-06-25 | Derco Aerospace, Inc. |
7823864-1-06-25 | Avibank Mfg., Inc. |
7823864-1-06-25 | Alcoa Global Fasteners, Inc. |