NSN 5305-00-929-9217
High Torque Screw
Two spring loaded balls in shank as self retaining feature.
Manufacturer part number 7823864-3-04-17 for national stock number 5305009299217.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-929-9217.
-
MPN or Model
7823864-3-04-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.268 inches and 0.315 inches -
Fastener Length
Between 1.350 inches and 1.377 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 1.062 inches and 1.082 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Fs251, fscm 8827 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-036-2673 MPN AS169-4-44Close Tolerance Screw
- 5305-01-132-0512 MPN AS301-4-64Close Tolerance Screw
- 5320-00-005-1051 MPN 1601-0619Blind Rivet
- 1560-00-065-2295 MPN 4384638-502Aircraft Arm Assembly
- 1560-00-123-1092 MPN 5115224-9Transition Assembly
- 1560-00-180-9328 MPN 5141319-31Aircraft Access Cover
- 1560-00-197-7476 MPN 3671731-501Footwarme Duct Assy
- 1680-00-470-5218 MPN 5815092-75Thermal Shield Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-929-9217 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7823864-3-04-17 | Boeing Company, The |
AS103-04-17 | Avibank Mfg., Inc. |
Stock Check
![](/public/images/partscage_shelf3.png)