NSN 5305-00-980-5746
High Torque Screw
Between 0.699 inches and 0.729 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number BACB30DP3-7 for national stock number 5305009805746.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-980-5746.
-
MPN or Model
BACB30DP3-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.699 inches and 0.729 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.192 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches bearing surface of head -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-010-9916 MPN 0SC2177TE4-08Machine Screw
- 5305-01-054-6247 MPN VT1696-7-20Close Tolerance Screw
- 5305-01-103-6023 MPN HT4068-3-14AClose Tolerance Screw
- 5305-01-158-6762 MPN SC2163-3-8Machine Screw
- 5305-01-181-5031 MPN HT4020-3-6AYShoulder Screw
- 5305-01-193-6851 MPN HT8137-5-3ASClose Tolerance Screw
- 5305-01-347-7115 MPN CHT4067-3-7AClose Tolerance Screw
- 5305-01-357-5869 MPN SC5049-3-37Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-980-5746 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30DP3-7 | The Boeing Company |
BACB30DP3-7 | Arconic Global Fasteners & Rings, |
BACB30DP3-7 | Hi-shear Corporation |
BACB30DP3-7 | Sps Technologies, Llc |
BACB30DP3-7 | Lisi Aerospace Canada Corp |
BACB30DP3-7 | Voi-shan/chatsworth |