NSN 5305-01-010-9943
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369-556 for national stock number 5305010109943.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-010-9943.
-
MPN or Model
MS3369-556
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.306 inches and 0.355 inches -
Fastener Length
Between 3.978 inches and 3.996 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.312 inches -
Grip Length
Between 3.500 inches and 3.516 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.875 inches first hole and 3.891 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-177-9742 MPN CA28027B-8HSPanel Screw Assembly
- 5305-01-185-3592 MPN AS303-24-14Close Tolerance Screw
- 5305-01-435-6422 MPN AS553-1Socket Head Cap Screw
- 5306-00-006-1412 MPN AS194-4-35Close Tolerance Bolt
- 5935-00-004-0232 MPN MS27506A082Electrical Connector Backshell
- 5940-00-082-4643 MPN MS18029-2L3Terminal Board Cover
- 5935-00-093-0415 MPN MS3108B22-16PElectrical Plug Connector
- 5935-00-189-2530 MPN MS3470L14-19PElectrical Receptacle Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-010-9943 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369-556 | Military Standards |
CA2658-5-56 | Arconic Global Fasteners & Rings, |
AS169-5-56 | Avibank Mfg., Inc. |
Stock Check
- NS: 1
- NE: 1