NSN 5305-01-011-4999
High Torque Screw
Retaining element in shank.
Manufacturer part number NASM3369B431 for national stock number 5305010114999.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-011-4999.
-
MPN or Model
NASM3369B431
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.278 inches and 0.329 inches -
Fastener Length
Between 2.356 inches and 2.376 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 1.937 inches and 1.953 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.260 inches first hole and 2.280 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-004-1437 MPN A51B35500-2Horizontal Stabilizer
- 5985-00-005-0207 MPN A51A9052-3Radio Frequency Power Divider
- 4920-00-008-5442 MPN 1128SME40306-1Dummy Transmitter
- 1560-00-019-7196 MPN 123ABP10069-501Fairing Assembly
- 1560-00-047-1888 MPN 89LM1893-1Link Asy
- 5985-00-057-6347 MPN 123SCAV162-3Antenna
- 4920-00-070-1766 MPN 123SCSEF105-1Pump
- 5935-00-136-7015 MPN GC800RL19-12SElectrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-011-4999 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM3369B431 | Military Standards |
GB511AE4-31 | Northrop Grumman Systems Corporation |
CA2630-0431 | Arconic Global Fasteners & Rings, |
AS108-04-31 | Avibank Mfg., Inc. |
VP1119-4-31 | Alcoa Global Fasteners, Inc. |
MS3369B431 | Military Standards |
CA2658-4-31 | Arconic Global Fasteners & Rings, |
AS169-4-31 | Avibank Mfg., Inc. |