NSN 5305-01-014-2222
High Torque Screw
Between 0.878 inches and 0.908 inches fastener length, fillister countersunk head style, between 0.2966 inches and 0.3016 inches head diameter, head height: 0.013 inches .
Manufacturer part number S5008-3-8 for national stock number 5305010142222.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-014-2222.
-
MPN or Model
S5008-3-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.878 inches and 0.908 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Head Height
0.013 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.477 inches and 0.497 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-227-1399 MPN HT1030-5-11Shoulder Screw
- 5305-00-316-8141 MPN HT4024L3-2Close Tolerance Screw
- 5305-00-802-1826 MPN 51B221-10Close Tolerance Screw
- 5305-00-984-4644 MPN BACB30EMP5L4Machine Screw
- 5305-01-142-8380 MPN HT4041-4-11-6YShoulder Screw
- 5305-01-146-6142 MPN HT4041-4-11-6Close Tolerance Screw
- 5305-01-346-0078 MPN SC5084-3-27Machine Screw
- 5305-01-352-8608 MPN SC1785T-06-03Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-014-2222 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S5008-3-8 | Northrop Grumman Systems Corporation |
S5008-3-8 | Alcoa Global Fasteners, Inc. |
S5008-3-8 | Arconic Global Fasteners & Rings, |
S5008-3-8 | Huck International, Inc. |
S5008-3-8 | Sps Technologies, Llc |
S5008-3-8 | Hi-shear Corporation |
S5008-3-8 | Lisi Aerospace Canada Corp |
S5008-3-8 | Huck Intl Inc |