NSN 5305-01-014-2589
High Torque Screw
Between 0.940 inches and 0.970 inches fastener length, fillister countersunk head style, between 0.2966 inches and 0.3016 inches head diameter, head height: 0.013 inches .
Manufacturer part number S5008-3-9 for national stock number 5305010142589.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-014-2589.
-
MPN or Model
S5008-3-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.940 inches and 0.970 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.2966 inches and 0.3016 inches -
Head Height
0.013 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
High-torque -
End Application
Aircraft, thunderbolt 11, a-10 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.539 inches and 0.559 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-239-1325 MPN HT4020-5-22AYShoulder Screw
- 5305-01-337-3295 MPN HT4075D6-14-61Close Tolerance Screw
- 5305-01-423-4570 MPN LD111-0044-2513Close Tolerance Screw
- 5305-01-433-3322 MPN TX1026V3-17AClose Tolerance Screw
- 5305-01-482-1579 MPN SC1786R-4-06Close Tolerance Screw
- 5305-01-512-8356 MPN TX1027D3-8AFClose Tolerance Screw
- 5305-01-541-5249 MPN TX1026C4-12AFClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-014-2589 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S5008-3-9 | Northrop Grumman Systems Corporation |
S5008-3-9 | Arconic Global Fasteners & Rings, |
S5008-3-9 | Alcoa Global Fasteners, Inc. |
S5008-3-9 | Huck International, Inc. |
S5008-3-9 | Sps Technologies, Llc |
S5008-3-9 | Hi-shear Corporation |
S5008-3-9 | Lisi Aerospace Canada Corp |
S5008-3-9 | Huck Intl Inc |