NSN 5305-01-015-6642
High Torque Screw
Between 0.689 inches and 0.719 inches fastener length, fillister countersunk head style, between 0.3898 inches and 0.3948 inches head diameter, head height: 0.015 inches .
Manufacturer part number S5008-4-4 for national stock number 5305010156642.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-015-6642.
-
MPN or Model
S5008-4-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 0.689 inches and 0.719 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.3898 inches and 0.3948 inches -
Head Height
0.015 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.225 inches and 0.245 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-177-5426 MPN SC2219-06-1Close Tolerance Screw
- 5305-00-435-1058 MPN VT1040-3-12Close Tolerance Screw
- 5305-00-486-1154 MPN HT4028L7-8Close Tolerance Screw
- 5305-00-889-3118 MPN SC111-256-4Machine Screw
- 5305-01-103-8822 MPN CHT4068-5-13Close Tolerance Screw
- 5305-01-142-7231 MPN ST3M496-5-17Shoulder Screw
- 5305-01-143-0597 MPN HT4020-5-18AXShoulder Screw
- 5305-01-190-4566 MPN SC2174V08-1Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-015-6642 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S5008-4-4 | Northrop Grumman Systems Corporation |
S5008-4-4 | Hi-shear Corporation |
S5008-4-4 | Lisi Aerospace Canada Corp |
S5008-4-4 | Alcoa Global Fasteners, Inc. |
S5008-4-4 | Arconic Global Fasteners & Rings, |
S5008-4-4 | Huck International, Inc. |
S5008-4-4 | Huck Intl Inc |