NSN 5305-01-015-3364
High Torque Screw
Between 0.891 inches and 0.921 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4025L3-8 for national stock number 5305010153364.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-015-3364.
-
MPN or Model
HT4025L3-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.891 inches and 0.921 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-196-5579 MPN ST3M430V5-18ASClose Tolerance Screw
- 5305-01-249-0893 MPN ST3M733-4L14Close Tolerance Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-168-9201 MPN LD111-0047-0303Close Tolerance Screw
- 5305-01-660-8842 MPN LD111-0046-2313Close Tolerance Screw
- 5306-00-151-6179 MPN VAL23611-5DS028Close Tolerance Bolt
- 5306-00-205-3521 MPN MS21250-05052Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-015-3364 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4025L3-8 | Huck International, Inc. |
CHT4025-3-8 | Arconic Global Fasteners & Rings, |
HT4025L3-8 | Sps Technologies, Llc |
HT4025L3-8 | Sps Technologies, Llc |
HT4025L3-8 | Hi-shear Corporation |
ST3M454-3L8 | Boeing Company, The |
HT4025L3-8 | Sps Technologies, Llc |
ST3M454-3L8 | Valley-todeco, Inc. |
HT4025L3-8 | Arconic Global Fasteners & Rings, |
ST3M454-3L8 | Heartland Precision Fasteners, Inc. |
ST3M454-3L8 | Houston Precision Fasteners I, Lp |
HT4025L3-8 | Sps Technologies, Llc |
ST3M454-3L8 | Fastener Innovation Technology, Inc. |
11905-3L8 | Reid Products Inc. |
WC4025L-3-8 | West Coast Aerospace Inc |
HT4025L3-8 | Sps Technologies Ltd Tj Brooks |
HT4025L3-8 | Lisi Aerospace Canada Corp |
HT4025L3-8 | Huck Intl Inc |
CHT4025-3-8 | Deutsch Co The |
CHT4025-3-8 | Sps Technologies, Llc |
CHT4025-3-8 | Alcoa Global Fasteners, Inc. |
HT4Q25L3-8 | Sps Technologies, Llc |
HT4Q25L3-8 | Sps Technologies, Llc |
HT4025L3-8 | Alcoa Global Fasteners, Inc. |
ST3M454-3L8 | Twist Tite Mfg, Inc |