NSN 5305-01-130-3273
High Torque Screw
Between 1.016 inches and 1.046 inches fastener length, oval countersunk head style, between 0.390 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HT4053-4-9 for national stock number 5305011303273.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-130-3273.
-
MPN or Model
HT4053-4-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.016 inches and 1.046 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Aluminum and chromate -
Surface Treatment Specification
Mil-c-83488 type 2 class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-406-3078 MPN ST3M733-4L9Close Tolerance Screw
- 5305-01-487-6877 MPN ST3M557-3-7Close Tolerance Screw
- 5320-01-080-3815 MPN ST3M665-12-23EPin-rivet
- 5305-01-044-7114 MPN HT8100-3-13Close Tolerance Screw
- 5305-01-054-6248 MPN C9535-7-22Close Tolerance Screw
- 5305-01-143-1755 MPN HT4009-6-15Shoulder Screw
- 5305-01-159-4487 MPN 3M933-4-14Machine Screw
- 5305-01-216-5203 MPN HT4075V4-9-22Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-130-3273 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4053-4-9 | Huck International, Inc. |
HT4053-4-9 | Arconic Global Fasteners & Rings, |
HT4053-4-9A | Huck International, Inc. |
HT4053-4-9A | Fastener Innovation Technology, Inc. |
HT4053-4-9A | West Coast Aerospace Inc |
HT4053-4-9A | Sps Technologies, Llc |
ST3M740-4L9 | Boeing Company, The |
HT4053-4-9A | Hi-shear Corporation |
HT4053-4-9A | Lisi Aerospace Canada Corp |
HT4053-4-9 | Alcoa Global Fasteners, Inc. |
HT4053-4-9 | Sps Technologies, Llc |
HT4053-4-9 | Hi-shear Corporation |
HT4053-4-9A | Sps Technologies Ltd Tj Brooks |
HT4053-4-9A | Sps Technologies Inc |
ST3M740-4L9 | Sps Technologies Inc |
HT4053-4-9 | Huck Intl Inc |
10115240 | Nimikkeistokeskus Ncb Finland |
ST3M740-4-9 | Boeing Company, The |
HT4053-4-9A | Alcoa Global Fasteners, Inc. |
ST3M740-4-9 | Alcoa Global Fasteners, Inc. |
HT4053-4-9A | Arconic Global Fasteners & Rings, |
ST3M740-4-L9 | Twist Tite Mfg, Inc |
HT4053-4-9A | Arconic Global Fasteners & Rings, |