NSN 5305-01-015-8776
High Torque Screw
Between 1.064 inches and 1.094 inches fastener length, fillister countersunk head style, between 0.3898 inches and 0.3948 inches head diameter, head height: 0.015 inches .
Manufacturer part number S5008-4-10 for national stock number 5305010158776.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-015-8776.
-
MPN or Model
S5008-4-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 1.064 inches and 1.094 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.3898 inches and 0.3948 inches -
Head Height
0.015 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.600 inches and 0.620 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-494-5678 MPN HT8136-1Close Tolerance Screw
- 5305-00-505-2745 MPN LS15266V3-17Close Tolerance Screw
- 5305-00-951-1140 MPN 112-0722-024Machine Screw
- 5305-01-047-0369 MPN HT4011-8-10Shoulder Screw
- 5305-01-133-1068 MPN HT8137-3-15Close Tolerance Screw
- 5305-01-217-9057 MPN HT4059V4-13ASShoulder Screw
- 5305-01-225-9642 MPN BACS12CK3U6Machine Screw
- 5305-01-270-3227 MPN HT4020-5-15YShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-015-8776 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S5008-4-10 | Arconic Global Fasteners & Rings, |
S5008-4-10 | Hi-shear Corporation |
S5008-4-10 | Lisi Aerospace Canada Corp |
S5008-4-10 | Sps Technologies, Llc |
S5008-4-10 | Northrop Grumman Systems Corporation |
S5008-4-10 | Huck International, Inc. |