NSN 5305-01-016-2924
High Torque Screw
2.933 inches fastener length, flat countersunk head style, 0.933 inches head diameter, grip diameter: between 0.6230 inches and 0.6240 inches .
Manufacturer part number 160D725151-11 for national stock number 5305010162924.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-016-2924.
-
MPN or Model
160D725151-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.538 inches -
Fastener Length
2.933 inches -
Head Style
Flat countersunk -
Head Diameter
0.933 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.143 inches first hole -
Internal Drive Style
Torque -
Thread Diameter
0.625 inches -
Grip Length
2.395 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.124 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 4340 -
Material Specification
Mil-s-5000 cond d military specification single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-001-5728 MPN GC801JP16-42PAElectrical Receptacle Connector
- 5930-00-060-9739 MPN GS839AP1Flow Switch
- 5935-00-113-2420 MPN GC811AG-2Electrical Receptacle Connector
- 1560-00-146-2195 MPN A51B53003-6Spoiler Assy
- 1560-00-146-2199 MPN A51P9125-1Aircraft Fuel Tank
- 1560-00-165-0283 MPN 85126RAircraft Structural Component Support
- 1560-00-231-1523 MPN 1128WS40102-1Pylon Antenna-wing Boom Assy
- 1560-00-254-8859 MPN 128P11527-5Removal Vortex Line
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-016-2924 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
160D725151-11 | Northrop Grumman Systems Corporation |
162D725151-2001 | Boeing Company, The |
160D725151-11 | Miller Stuart Inc. |
160D725151-11 | Sonic Industries Inc. |
160D725151-11 | Reid Products Inc. |
162D725151-2001 | Ogden Air Logistics Center |