NSN 5305-01-022-1955
High Torque Screw
Between 3.698 inches and 3.728 inches fastener length, flat countersunk head style, between 0.296 inches and 0.331 inches head diameter, grip diameter: between 0.1630 inches and 0.1635 inches .
Manufacturer part number LS15235-08-55 for national stock number 5305010221955.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-022-1955.
-
MPN or Model
LS15235-08-55
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 3.698 inches and 3.728 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.296 inches and 0.331 inches -
Grip Diameter
Between 0.1630 inches and 0.1635 inches -
Internal Drive Style
W/o internal drive -
Thread Diameter
0.164 inches -
Grip Length
Between 3.427 inches and 3.447 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp e4340 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1560-00-008-8034 MPN 4F50157-165AAircraft Floor
- 1560-00-009-0772 MPN 4T52005-101AOutboard Elevator Weight
- 1560-00-016-1976 MPN 3E42214-101Frame Cover Assembly
- 1560-00-022-0339 MPN 766489-2Rudder Torq Support
- 1560-00-093-7657 MPN 4F55317-103AOutboard Cargo Floor Rail
- 1680-00-120-2560 MPN 391628-11Scan Curtain Runner
- 5935-00-137-0897 MPN LS9978-41A2Electrical Receptacle Connector
- 1560-00-138-4782 MPN 4C15017-104BSlats Switch Lever
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-022-1955 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15235-08-55 | Lockheed Martin Corporation |
LS15235-08-55 | Lockheed Martin Corporation |