NSN 5305-01-025-4861
High Torque Screw
Retaining element in threads.
Manufacturer part number MS3369-818 for national stock number 5305010254861.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-025-4861.
-
MPN or Model
MS3369-818
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.396 inches and 0.447 inches -
Fastener Length
Between 1.771 inches and 1.791 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.251 inches and 0.266 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4986 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.500 inches -
Grip Length
Between 1.125 inches and 1.141 inches -
Thready Qty Per Inch (tpi)
20 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.648 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5306-01-330-4093 MPN AS417-1-08-42Machine Bolt
- 5306-01-476-9113 MPN MT140RC7-7-6Assembled Sleeve Bolt
- 5935-00-053-0114 MPN MS3100R16-11SElectrical Receptacle Connector
- 5905-00-062-0151 MPN MS35834-396Film Fixed Resistor
- 5940-00-082-4642 MPN MS18029-1S11Terminal Board Cover
- 5905-00-108-5585 MPN MS35046-41Nonprecision Wire Wound Variable Resistor
- 5940-00-113-8184 MPN MS25036-150-NLug Terminal
- 5940-00-115-0763 MPN MS20659-140Lug Terminal
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-025-4861 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369-818 | Military Standards |
AS169-8-18 | Avibank Mfg., Inc. |
MS18115-0818 | Military Standards |
MS3369-818 | Military Standards |
AS169-8-18 | Avibank Mfg., Inc. |
MS18115-0818 | Military Standards |
Stock Check
![](/public/images/partscage_shelf3.png)
- NE: 1