NSN 5305-01-027-5251
High Torque Screw
Between 0.862 inches and 0.909 inches fastener length, flat countersunk head style, between 0.390 inches and 0.395 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 106750-4-9 for national stock number 5305010275251.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-027-5251.
-
MPN or Model
106750-4-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.290 inches and 0.357 inches -
Fastener Length
Between 0.862 inches and 0.909 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.390 inches and 0.395 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Surface Finish
63.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
26512-gb510l manufacturers standard
More from these suppliers
- 5305-00-141-7320 MPN SC1777-08-V12Machine Screw
- 5305-00-354-5147 MPN HT4024L4-5Close Tolerance Screw
- 5305-00-450-5970 MPN VT1039V4-9Close Tolerance Screw
- 5305-00-935-7580 MPN H804-632-16Machine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-044-7114 MPN HT8100-3-13Close Tolerance Screw
- 5305-01-055-3811 MPN BACB30LU5-6Close Tolerance Screw
- 5305-01-146-6141 MPN HT4049-4-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-027-5251 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106750-4-9 | Sps Technologies, Llc |
HT8043-4-9 | Arconic Global Fasteners & Rings, |
HT239PB4-9 | Hi-shear Corporation |
HT239PB4-9 | Lisi Aerospace Canada Corp |
HT8043-4-9 | Alcoa Global Fasteners, Inc. |
GB510L4-9 | Alcoa Global Fasteners, Inc. |
GB510L4-9 | Northrop Grumman Systems Corporation |