1-321-802-5889

NSN 5306-01-114-1267

Close Tolerance Hex Head Bolt

About this product

Between 1.319 inches and 1.366 inches fastener length, double hexagon head style, between 0.154 inches and 0.174 inches head height, width between flats: between 0.430 inches and 0.439 inches .

Manufacturer part number ST3M453-4-15 for national stock number 5306011141267.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-114-1267.

  • MPN or Model

    ST3M453-4-15

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.371 inches and 0.438 inches
  • Fastener Length
    Between 1.319 inches and 1.366 inches
  • Head Style
    Double hexagon
  • Head Height
    Between 0.154 inches and 0.174 inches
  • Width Between Flats
    Between 0.430 inches and 0.439 inches
  • Grip Diameter
    Between 0.2490 inches and 0.2495 inches
  • Thread Diameter
    0.250 inches
  • Grip Length
    Between 0.928 inches and 0.948 inches
  • Thready Qty Per Inch (tpi)
    28
  • Material
    Stainless steel
  • Material Specification
    23-112 fscm 76301 mfr ref single material response
  • Thread Series Designator
    Unjf
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-114-1267 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306011141267

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
ST3M453-4-15 Boeing Company, The
VAL23029-4-15 Valley-todeco, Inc.
AIC753-4-15 Sps Technologies, Llc
PBF1253-4-15 Sps Technologies, Llc
MB61-4-15 Hi-shear Corporation
ST3M453-4-15 Arconic Global Fasteners & Rings,
VS3204-4-15 Arconic Global Fasteners & Rings,
S353-4-15 Huck International, Inc.
ST3M453-4-15 Sonic Industries Inc.
ST3M453-4-15 Sps Technologies, Llc
11825-4-15 Reid Products Inc.
ST3M453-4-15 Sps Technologies, Llc
MB61-4-15 Lisi Aerospace Canada Corp
BM17019-4-15 Huck International, Inc.
BM17019-4-15 Huck Intl Inc
S353-4-15 Huck Intl Inc
VS3204-4-15 Alcoa Global Fasteners, Inc.
GS1016-4-15 B & B Specialties Inc.
Stock Check
Availability of this NSN has not been updated recently. Submit the pricing and availbility form above to receive an up to date quote.