NSN 5305-01-028-0186
High Torque Screw
Between 1.140 inches and 1.187 inches fastener length, flat countersunk head style, between 0.628 inches and 0.633 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number HT123-5-10 for national stock number 5305010280186.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-028-0186.
-
MPN or Model
HT123-5-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Fastener Length
Between 1.140 inches and 1.187 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.628 inches and 0.633 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
24.0 rockwell c and 44.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5736 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-501-4903 MPN VS3258C4G3-4Headle Shoulder Pin
- 5305-00-478-0475 MPN 756432-1Machine Screw
- 5305-01-046-3341 MPN HT4010-5-5Shoulder Screw
- 5305-01-056-5451 MPN BACB30LK3-8Close Tolerance Screw
- 5305-01-102-7955 MPN CHT4067-4-6Close Tolerance Screw
- 5305-01-144-5595 MPN HT4009-5-22Shoulder Screw
- 5305-01-159-1294 MPN HT4016-5-8Close Tolerance Screw
- 5305-01-237-2782 MPN HT4057-4-11AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-028-0186 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT123-5-10 | Huck International, Inc. |
HT1029A-5-10 | Arconic Global Fasteners & Rings, |
HT5N-10 | Hi-shear Corporation |
54291-5-10 | Sps Technologies, Llc |
HT5N-10 | Lisi Aerospace Canada Corp |
HT1029A-5-10 | Alcoa Global Fasteners, Inc. |
3M123-5-10 | Fastener Innovation Technology, Inc. |
3M123-5-10 | Alcoa Global Fasteners, Inc. |
3M123-5-10 | Boeing Company, The |
HT123-5-10 | Huck Intl Inc |