NSN 5305-01-101-8537
High Torque Screw
Dry film lubricant applied to shank and threads.
Manufacturer part number HT4024L7-9M for national stock number 5305011018537.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-101-8537.
-
MPN or Model
HT4024L7-9M
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.631 inches and 0.681 inches -
Fastener Length
Between 1.203 inches and 1.233 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.612 inches and 0.672 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.438 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-097-3029 MPN R1432P002LSocket Head Cap Screw
- 5305-01-141-7194 MPN HT4020-5-22YShoulder Screw
- 5305-01-196-8134 MPN SC1786RV3-11DClose Tolerance Screw
- 5305-01-206-3472 MPN SC1779-6-12Close Tolerance Screw
- 5305-01-303-6353 MPN SC1823-3-8Close Tolerance Screw
- 5305-01-346-5321 MPN CHT4025-4-12XShoulder Screw
- 5305-01-365-6318 MPN SC102-3-12AClose Tolerance Screw
- 5305-01-434-0483 MPN TX1027D3-3Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-101-8537 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4024L7-9M | Huck International, Inc. |
ST3M455-7L9M | Boeing Company, The |
HT4024L7-9M | Sps Technologies, Llc |
HT4024L7-9M | Alcoa Global Fasteners, Inc. |
HT4024L7-9M | Sps Technologies, Llc |
HT4024L7-9M | Hi-shear Corporation |
ST3M544-7L9M | Arconic Global Fasteners & Rings, |
ST3M455-7L9M | Huck International, Inc. |
11907-7L9M | Reid Products Inc. |
ST3M544-7L9M | Hi-shear Corporation |
ST3M455-7L9M | Sps Technologies, Llc |
434990 | Sps Technologies Ltd Tj Brooks |
ST3M544-7L9M | Lisi Aerospace Canada Corp |
ST3M4555-7L9M | Fastener Innovation Technology, Inc. |
WC4024L7-9M | West Coast Aerospace Inc |
434990 | Sps Technologies Inc |
HT4024L7-9M | Huck Intl Inc |
434990 | Fastener Innovation Technology, Inc. |
434990 | West Coast Aerospace Inc |