NSN 5305-01-028-2470
High Torque Screw
Furnished with one o-ring.
Manufacturer part number HT4020-4-6A for national stock number 5305010282470.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-028-2470.
-
MPN or Model
HT4020-4-6A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.510 inches -
Fastener Length
Between 0.828 inches and 0.875 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.502 inches and 0.507 inches -
Head Height
Between 0.071 inches and 0.073 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-055-8809 MPN BACB30LU5-12Close Tolerance Screw
- 5305-01-352-2078 MPN VCL0008-8-21Close Tolerance Screw
- 5305-01-435-3851 MPN BACB30LU7-33Close Tolerance Screw
- 5306-00-143-2073 MPN J294P08AMachine Bolt
- 5306-01-059-1945 MPN VFK101G4-011Shear Bolt
- 5306-01-142-8368 MPN VAL23607-4-94Shoulder Bolt
- 5306-01-173-0334 MPN VCG0001-6D15Close Tolerance Bolt
- 5306-01-206-7169 MPN J643P03AMachine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-028-2470 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4020-4-6A | Arconic Global Fasteners & Rings, |
HT4020-4-6A | Huck International, Inc. |
ST3M652C4-6A | Fastener Innovation Technology, Inc. |
WC4020-4-6A | West Coast Aerospace Inc |
HT4020-4-6A | Hi-shear Corporation |
HT4020-4-6A | Sps Technologies, Llc |
HT4020-4-6A | Lisi Aerospace Canada Corp |
HT4020-4-6A | Alcoa Global Fasteners, Inc. |
HT4020-4-6A | Sps Technologies, Llc |
ST3M652C4-6A | Valley-todeco, Inc. |
ST3M652C4-6A | Heartland Precision Fasteners, Inc. |
ST3M652C4-6A | Houston Precision Fasteners I, Lp |
HT4020-4-6A | Sps Technologies, Llc |
HT4020-4-6A | Sps Technologies, Llc |
11925C4-6A | Reid Products Inc. |
HT4020-4-6A | Sps Technologies Ltd Tj Brooks |
ST3M652C4-6A | Boeing Company, The |
HT4020-4-6A | Huck Intl Inc |
ST3M652C4-6A | Alcoa Global Fasteners, Inc. |