NSN 5305-01-030-1767
High Torque Screw
Between 0.797 inches and 0.827 inches fastener length, oval countersunk head style, between 0.297 inches and 0.302 inches head diameter, grip diameter: between 0.1630 inches and 0.1635 inches .
Manufacturer part number HT4017-08-8 for national stock number 5305010301767.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-030-1767.
-
MPN or Model
HT4017-08-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.287 inches and 0.337 inches -
Fastener Length
Between 0.797 inches and 0.827 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.297 inches and 0.302 inches -
Grip Diameter
Between 0.1630 inches and 0.1635 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.164 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
23-112, mcdonnel douglas corporation mfr ref single material response -
Thread Series Designator
Unjc
More from these suppliers
- 5305-01-134-2723 MPN HT4049-6-16Close Tolerance Screw
- 5305-01-191-0383 MPN SC2174C06-3Machine Screw
- 5305-01-198-2449 MPN HT8137-5-4ASClose Tolerance Screw
- 5305-01-211-0658 MPN SC2176T-04-06Machine Screw
- 5305-01-220-0201 MPN 3M927-9DL34Close Tolerance Screw
- 5305-01-266-9187 MPN HS4717-1032-16BMachine Screw
- 5305-01-406-3080 MPN HT4067-3-4AClose Tolerance Screw
- 5305-01-417-9028 MPN SC5064-3-20Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-030-1767 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4017-08-8 | Arconic Global Fasteners & Rings, |
HT4017-08-8 | Hi-shear Corporation |
HT4017-08-8 | Sps Technologies, Llc |
HT4017-08-8 | Lisi Aerospace Canada Corp |
HT4017-08-8 | Huck International, Inc. |
HT4017-08-8 | Alcoa Global Fasteners, Inc. |
ST3M649-08-8 | Alcoa Global Fasteners, Inc. |
ST3M649-08-8 | Boeing Company, The |
HT4017-08-8 | Huck Intl Inc |