NSN 5305-01-030-7636
High Torque Screw
Between 0.926 inches and 0.956 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4049-4D10 for national stock number 5305010307636.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-030-7636.
-
MPN or Model
HT4049-4D10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 0.926 inches and 0.956 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.803 inches first hole and 0.843 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-310-6414 MPN HT4028L7-10Close Tolerance Screw
- 5305-00-369-1767 MPN CHT4024-3-6Close Tolerance Screw
- 5305-01-055-3803 MPN SC1776-7-17Close Tolerance Screw
- 5305-01-144-5595 MPN HT4009-5-22Shoulder Screw
- 5305-01-241-0759 MPN HT4067-4-17AClose Tolerance Screw
- 5305-01-337-6987 MPN HT4075D4-13-57Close Tolerance Screw
- 5305-01-338-4023 MPN HT4075D10-22-91Close Tolerance Screw
- 5305-01-359-2509 MPN GB511DU06-52Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-030-7636 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-4D10 | Huck International, Inc. |
ST3M714-4D10 | The Boeing Company |
HT4049-4D10 | Hi-shear Corporation |
HT4049-4D10 | Sps Technologies, Llc |
HT4049-4D10 | Arconic Global Fasteners & Rings, |
HT4049-4D10 | Lisi Aerospace Canada Corp |
HT4049-4D10 | Alcoa Global Fasteners, Inc. |
HT4049-4D10 | Sps Technologies, Llc |
ST3M714-4D10 | Fastener Innovation Technology, Inc. |
ST3M714-4D10 | West Coast Aerospace Inc |
ST3M714-4D10 | Boeing Company, The |
HT4049-4D10 | Huck Intl Inc |
ST3M714-4D10 | Heartland Precision Fasteners, Inc. |
ST3M714-4D10 | Houston Precision Fasteners I, Lp |
ST3M714-4D10 | Sps Technologies, Llc |
ST3M714-4D10 | Sps Technologies, Llc |
ST3M714-4D10 | Reid Products Inc. |
ST3M714-4D10 | Joslyn Clark Controls Inc |