NSN 5305-01-032-7045
High Torque Screw
Between 2.314 inches and 2.344 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number HT4049-6D31 for national stock number 5305010327045.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-032-7045.
-
MPN or Model
HT4049-6D31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.416 inches -
Fastener Length
Between 2.314 inches and 2.344 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.111 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.928 inches and 1.948 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.113 inches first hole and 0.123 inches first hole -
Material
Steel -
Material Specification
23-112, mcdonnel douglas corporation mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-338-3216 MPN HT1029A4-12Close Tolerance Screw
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-00-951-1106 MPN R1443P003Machine Screw
- 5305-01-076-4931 MPN HT4020-5-10AXShoulder Screw
- 5305-01-145-6968 MPN HT4068-6-23AClose Tolerance Screw
- 5305-01-235-8317 MPN HT4059V3-6DShoulder Screw
- 5305-01-303-6352 MPN SC1823-3-6PClose Tolerance Screw
- 5305-01-337-5985 MPN HT4075D6-19-93Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-032-7045 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-6D31 | Hi-shear Corporation |
HT4049-6D31 | Sps Technologies, Llc |
HT4049-6D31 | Arconic Global Fasteners & Rings, |
HT4049-6D31 | Huck International, Inc. |
HT4049-6D31 | Lisi Aerospace Canada Corp |
HT4049-6D31 | Sps Technologies Ltd Tj Brooks |
HT4049-6D31 | Alcoa Global Fasteners, Inc. |
HT4049-6D31 | Sps Technologies, Llc |
ST3M714-6D31 | Fastener Innovation Technology, Inc. |
WC4049-6D31 | West Coast Aerospace Inc |
ST3M714-6D31 | Boeing Company, The |
HT4049-6D31 | Huck Intl Inc |
ST3M714-6D31 | West Coast Aerospace Inc |