NSN 5305-01-033-5220
High Torque Screw
Between 1.051 inches and 1.081 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number HT4049-4D12 for national stock number 5305010335220.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-033-5220.
-
MPN or Model
HT4049-4D12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.291 inches and 0.341 inches -
Fastener Length
Between 1.051 inches and 1.081 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.113 inches first hole and 0.123 inches first hole -
Material
Steel -
Material Specification
23-112, mcdonnel douglas corporation mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6964 MPN HT4017-08-7Close Tolerance Screw
- 5305-01-142-8377 MPN HT4041-4-11-5YShoulder Screw
- 5305-01-210-3854 MPN HT4068-3D3AClose Tolerance Screw
- 5305-01-270-3055 MPN VT1694W4-6Close Tolerance Screw
- 5305-01-346-3768 MPN SC3102-3-7Close Tolerance Screw
- 5305-01-417-2496 MPN TX1027D3-20AClose Tolerance Screw
- 5305-01-435-6369 MPN BACB30LU9-23Close Tolerance Screw
- 5305-01-436-2388 MPN BACB30LU4-1Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-033-5220 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-4D12 | Arconic Global Fasteners & Rings, |
HT4049-4D12 | Hi-shear Corporation |
HT4049-4D12 | Sps Technologies, Llc |
HT4049-4D12 | Lisi Aerospace Canada Corp |
HT4049-4D12 | Huck International, Inc. |
HT4049-4D12 | Alcoa Global Fasteners, Inc. |
HT4049-4D12 | Sps Technologies, Llc |
11931-4D12 | Reid Products Inc. |
ST3M714-4D12 | Boeing Company, The |
HT4049-4D12 | Huck Intl Inc |