NSN 5305-01-036-2671
High Torque Screw
Retaining element in shank.
Manufacturer part number MS3369B430 for national stock number 5305010362671.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-036-2671.
-
MPN or Model
MS3369B430
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.277 inches and 0.328 inches -
Fastener Length
Between 2.293 inches and 2.313 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Locking Feature
Detent ball bearing surface of head -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Grip Length
Between 1.875 inches and 1.891 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
63000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.198 inches first hole and 2.218 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-901-4417 MPN CA4850-04-19Socket Head Cap Screw
- 5305-01-127-4208 MPN CA21097-3-5Machine Screw
- 5305-01-280-5770 MPN CA2193-3-11Close Tolerance Screw
- 5306-01-537-0079 MPN AS453A4-13Machine Bolt
- 5935-00-005-2828 MPN MS24265Electrical Receptacle Connector
- 5935-00-008-4354 MPN MS27473T16B99SElectrical Plug Connector
- 5935-00-044-6810 MPN MS3110E10-6PElectrical Receptacle Connector
- 5935-00-051-2580 MPN MS24264R10T5SNElectrical Receptacle Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-036-2671 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B430 | Military Standards |
AS169-4-30 | Avibank Mfg., Inc. |
CA2658-4-30 | Arconic Global Fasteners & Rings, |