NSN 5305-01-036-9771
High Torque Screw
Between 0.636 inches and 0.666 inches fastener length, flat countersunk head style, between 0.296 inches and 0.331 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number LS15235-08-6 for national stock number 5305010369771.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-036-9771.
-
MPN or Model
LS15235-08-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.636 inches and 0.666 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.296 inches and 0.331 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.164 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 8740 or steel comp e4340 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 1680-00-015-4194 MPN 412988-101Seat Separator Support
- 1560-00-016-1956 MPN 3E42168-101Intercostal Cover
- 1560-00-018-5928 MPN 3C24061-101Spoi Drive Assembly
- 4820-00-021-5483 MPN 3A92204-101Check Valve
- 1560-00-072-7859 MPN 3F31023-101Entrance Door Lever
- 1560-00-088-0882 MPN 4F52139-101AActuator Strut Assembly
- 1680-00-094-4412 MPN 176057Fuel Drai Connector
- 5930-00-136-3274 MPN 756113-103Toggle Switch
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-036-9771 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS15235-08-6 | Lockheed Martin Corporation |
LS15235-08-6 | Lockheed Martin Corporation |