NSN 5305-01-038-9555
High Torque Screw
Between 0.642 inches and 0.672 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BACB30LH3-5 for national stock number 5305010389555.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-038-9555.
-
MPN or Model
BACB30LH3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.642 inches and 0.672 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-927-0319 MPN 32-511554-3Compression Engine Mount Bolt
- 5305-01-207-7517 MPN BACS12CK3-35Machine Screw
- 5305-01-512-8347 MPN 3M1169V3-27AClose Tolerance Screw
- 5306-00-420-6474 MPN VFK100G-05034Shear Bolt
- 5306-01-025-6959 MPN VAL23029-4-3Close Tolerance Bolt
- 5306-01-055-0160 MPN VCG0009-4-6Shear Bolt
- 5306-01-129-0561 MPN VCD0004-8-22FShear Bolt
- 5306-01-210-9414 MPN VAL23033-4H10XShoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-038-9555 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LH3-5 | The Boeing Company |
BACB30LH3-5 | Boeing Defence Australia Ltd |
BACB30LH3-5 | Boeing Defence Australia Ltd |
BACB30LH3-5 | Sps Technologies, Llc |
BACB30LH3-5 | Valley-todeco, Inc. |
BACB30LH3-5 | Arconic Global Fasteners & Rings, |
BACB30LH3-5 | Federal Manufacturing Corporation |
BACB30LH3-5 | Sps Technologies, Llc |
BACB30LH3-5 | Voi-shan/chatsworth |
BACB30LH3-5 | Huck Intl Inc |
BACB30LH3-5 | Grimes Aerospace Co |
BACB30LH3-5 | Sps Technologies, Llc |