NSN 5305-01-041-0731
High Torque Screw
Between 2.572 inches and 2.619 inches fastener length, flat countersunk head style, between 0.698 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number SFH22-6-35 for national stock number 5305010410731.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-041-0731.
-
MPN or Model
SFH22-6-35
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.441 inches -
Fastener Length
Between 2.572 inches and 2.619 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.698 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.101 inches all holes and 0.111 inches all holes -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 2.178 inches and 2.198 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.337 inches all holes and 2.470 inches all holes -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-571-8180 MPN 95972-5-6 Aircraft Index Pin
- 5305-00-508-7714 MPN 106336C3-3Machine Screw
- 5305-00-571-9593 MPN 76122-4-5Machine Screw
- 5305-00-870-2846 MPN R1463P008Machine Screw
- 5305-00-971-7492 MPN NAS1164-1LSocket Head Cap Screw
- 5305-01-044-3012 MPN SFH22D6A15Close Tolerance Screw
- 5305-01-097-8939 MPN 20097-96C7DSocket Head Cap Screw
- 5305-01-126-4719 MPN HT4049-4-6Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-041-0731 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SFH22-6-35 | Sps Technologies, Llc |
SFH22-6-35 | Sps Technologies, Llc |