NSN 5305-01-047-0482
High Torque Screw
Between 1.312 inches and 1.343 inches fastener length, flat countersunk head style, between 0.542 inches and 0.596 inches head diameter, grip diameter: between 0.4062 inches and 0.4067 inches .
Manufacturer part number HT4011-6-13 for national stock number 5305010470482.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-047-0482.
-
MPN or Model
HT4011-6-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.516 inches -
Fastener Length
Between 1.312 inches and 1.343 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.542 inches and 0.596 inches -
Grip Diameter
Between 0.4062 inches and 0.4067 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-300-2219 MPN BACB30LU4-11Close Tolerance Screw
- 5305-00-801-7104 MPN 51B221-14HClose Tolerance Screw
- 5305-00-897-4139 MPN 51B333-32HMachine Screw
- 5305-01-076-4930 MPN HT4020-4-9AXShoulder Screw
- 5305-01-076-4932 MPN HT4020-5-9AXShoulder Screw
- 5305-01-098-0594 MPN S5008-3-10Close Tolerance Screw
- 5305-01-145-5449 MPN HT4041-7-16-9XShoulder Screw
- 5305-01-158-5371 MPN 3M893-3-9Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-047-0482 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4011-6-13 | Hi-shear Corporation |
HT4011-6-13 | Huck International, Inc. |
HT4011-6-13 | Arconic Global Fasteners & Rings, |
ST3M506-6-13 | Boeing Company, The |
HT4011-6-13 | Sps Technologies, Llc |
HT4011-6-13 | Alcoa Global Fasteners, Inc. |
HT4011-6-13 | Sps Technologies, Llc |
ST3M506-6-13 | Alcoa Global Fasteners, Inc. |
HT4011-6-13 | Huck Intl Inc |