NSN 5305-01-047-8822
High Torque Screw
Between 0.978 inches and 1.025 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number 53B336-6 for national stock number 5305010478822.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-047-8822.
-
MPN or Model
53B336-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.593 inches and 0.660 inches -
Fastener Length
Between 0.978 inches and 1.025 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4340 or steel comp 4140 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-5626 military specification 3rd material response or mil-s-6049 military specification 4th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-097-7485 MPN AIC812-06-10Machine Screw
- 5305-00-143-1952 MPN A1C84-4-6Machine Screw
- 5305-00-145-0752 MPN NAS1101E0H38Machine Screw
- 5305-00-891-3674 MPN AIC207-12-1Shoulder Screw
- 5305-00-915-4763 MPN AIC792-3-4Machine Screw
- 5305-00-917-6057 MPN NAS1101-04-8Machine Screw
- 5305-01-006-9352 MPN 754066Socket Head Cap Screw
- 5305-01-059-1954 MPN BACB30LU3-29Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-047-8822 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
53B336-6 | Northrop Grumman Technical Services, |
53B336-6 | Northrop Grumman Systems Corporation |
53B336-6 | Sps Technologies, Llc |
53B336-6 | Arconic Global Fasteners & Rings, |
53B336-6 | Huck International, Inc. |
53B336-6 | Sps Technologies, Llc |
53B336-6 | Hi-shear Corporation |
53B336-6 | Sps Technologies, Llc |
53B336-6 | Alcoa Global Fasteners, Inc. |
53B336-6 | Lisi Aerospace Canada Corp |
53B336-6 | Huck Intl Inc |