NSN 5305-01-052-4453
High Torque Screw
Between 4.226 inches and 4.246 inches fastener length, crowned hexagon head style, between 0.189 inches and 0.204 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number MS3369B659 for national stock number 5305010524453.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-052-4453.
-
MPN or Model
MS3369B659
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.351 inches and 0.402 inches -
Fastener Length
Between 4.226 inches and 4.246 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.189 inches and 0.204 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3737 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.375 inches -
Grip Length
Between 3.688 inches and 3.704 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.099 inches first hole and 4.119 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-378-4480 MPN TL12156-101Repair
- 5305-01-501-1925 MPN CA22001C08-9-12Captive Hexag Screw
- 5306-00-541-9715 MPN CA4510-10-30Close Tolerance Bolt
- 5305-01-286-3501 MPN AVL342Panel Screw Assembly
- 5306-01-062-7541 MPN AS105-04-0845Self Retaining Bolt
- 5306-01-537-0080 MPN AS453A4-14Machine Bolt
- 5306-01-608-2450 MPN AS194-5-44Machine Bolt
- 5320-01-521-5672 MPN AAP123C48-8Solid Rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-052-4453 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369B659 | Military Standards |
AS169-6-59 | Avibank Mfg., Inc. |
CA2658-6-59 | Arconic Global Fasteners & Rings, |