NSN 5305-01-052-9816
High Torque Screw
Between 0.548 inches and 0.578 inches fastener length, flat countersunk head style, between 0.573 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number AIC984-5-2 for national stock number 5305010529816.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-052-9816.
-
MPN or Model
AIC984-5-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.413 inches and 0.463 inches -
Fastener Length
Between 0.548 inches and 0.578 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.573 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-387-3768 MPN AIC1651-5-62Close Tolerance Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
- 5305-01-435-6306 MPN BACB30LU9-19Close Tolerance Screw
- 5305-01-468-5688 MPN LD111-0044-1238Close Tolerance Screw
- 5305-01-476-9165 MPN TX1027V4-4AClose Tolerance Screw
- 5305-01-521-5788 MPN TX1027C3-10AClose Tolerance Screw
- 5305-01-525-5015 MPN 120-261E3P8Aircraf Shear Screw
- 5305-01-579-6431 MPN HT4048-8D46Close Toleran Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-052-9816 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC984-5-2 | Sps Technologies, Llc |
C7984-5-2 | Huck International, Inc. |
C7984-5-2 | Sps Technologies, Llc |
C7984-5-2 | Sps Technologies, Llc |
C7984-5-2 | Arconic Global Fasteners & Rings, |
C7984-5-2 | Sps Technologies, Llc |
C7984-5-2 | Sps Technologies, Llc |
C7984-5-2 | Alcoa Global Fasteners, Inc. |
C7984-5-2 | Lockheed Martin Corporation |
C7984-5-2P | Lockheed Martin Corporation |
AIC984-5-2P | Sps Technologies, Llc |
Stock Check
- NE: 42
- NS: 222