NSN 5305-01-053-5802
High Torque Screw
Between 0.736 inches and 0.786 inches fastener length, flat countersunk head style, between 0.429 inches and 0.479 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number AIC985-5D4 for national stock number 5305010535802.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-053-5802.
-
MPN or Model
AIC985-5D4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 0.736 inches and 0.786 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.479 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.511 inches first hole -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-470-8185 MPN AIC82-4-19Close Tolerance Screw
- 5305-00-840-5962 MPN AIC617-1Externally Relieved Body Screw
- 5305-01-147-6732 MPN AIC811-04-2Socket Head Cap Screw
- 5305-01-350-5315 MPN AIC1700-4-12Close Tolerance Screw
- 5305-01-564-4499 MPN R10001350-0021Machine Screw
- 5305-01-653-2769 MPN BACS12HL3A18Socket Head Cap Screw
- 5306-00-151-6179 MPN AIC2263A05D028Close Tolerance Bolt
- 5306-01-013-9430 MPN AIC260E-5-57Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-053-5802 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC985-5D4 | Sps Technologies, Llc |
PBF1166-5D4 | Sps Technologies, Llc |
121558-5-4P | Sps Technologies, Llc |
VT1694F5-4D | Alcoa Global Fasteners, Inc. |
C7985-5D4 | Sequence Support Services Inc |
C7985-5D4 | Huck International, Inc. |
C7985-5D4 | Lockheed Martin Corporation |
AIC985-5D4P | Sps Technologies, Llc |