NSN 5305-01-054-6237
High Torque Screw
1.882 inches fastener length, between 0.3735 inches and 0.3745 inches grip diameter, offset cruciform (torque set) internal drive style, thread diameter: 0.375 inches.
Manufacturer part number AIC9535-6-21 for national stock number 5305010546237.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6237.
-
MPN or Model
AIC9535-6-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.555 inches and 0.585 inches -
Fastener Length
1.882 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-152-0536 MPN AIC82-5-24Close Tolerance Screw
- 5305-00-455-0416 MPN AIC792-5-13Close Tolerance Screw
- 5305-01-052-9818 MPN AIC984-4-14Close Tolerance Screw
- 5305-01-223-3599 MPN LE111-0041-2310Close Tolerance Screw
- 5305-01-328-9227 MPN AIC1700-3-5Close Tolerance Screw
- 5305-01-417-2493 MPN TX1026V4-18AClose Tolerance Screw
- 5305-01-423-4569 MPN LD111-0044-2510Close Tolerance Screw
- 5305-01-451-3491 MPN C7985-3D9RShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6237 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC9535-6-21 | Sps Technologies, Llc |
121754-6-21 | Sps Technologies, Llc |
VT1696-6-21 | Alcoa Global Fasteners, Inc. |
PBF1198-6-21 | Sps Technologies, Llc |
VT1696-6-21 | Arconic Global Fasteners & Rings, |
C9535-6-21 | Sps Technologies, Llc |
121754-6-21 | Sps Technologies, Llc |
C9535-6-21 | Lockheed Martin Corporation |
C9535-6-21 | Arconic Global Fasteners & Rings, |
C9535-6-21 | Sps Technologies, Llc |