NSN 5305-01-054-6240
High Torque Screw
2.258 inches fastener length, between 0.3735 inches and 0.3745 inches grip diameter, offset cruciform (torque set) internal drive style, thread diameter: 0.375 inches.
Manufacturer part number 121754-6-27 for national stock number 5305010546240.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6240.
-
MPN or Model
121754-6-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.555 inches and 0.585 inches -
Fastener Length
2.258 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-345-1582 MPN LS15265V4-20Close Tolerance Screw
- 5305-00-441-9949 MPN A1C83-8A19Close Tolerance Screw
- 5305-00-929-1658 MPN A1C792-3-2Machine Screw
- 5305-01-061-0732 MPN NAS1101-3-18BMachine Screw
- 5305-01-130-3258 MPN SC2671-3-12Machine Screw
- 5305-01-133-4474 MPN HT4024L3-20Close Tolerance Screw
- 5305-01-158-5372 MPN AIC940-3-12Machine Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6240 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121754-6-27 | Sps Technologies, Llc |
VT1696-6-27 | Alcoa Global Fasteners, Inc. |
PBF1198-6-27 | Sps Technologies, Llc |
C9535-6-27 | Sps Technologies, Llc |
C9535-6-27 | Arconic Global Fasteners & Rings, |
C9535-6-27 | Sps Technologies, Llc |
121754-6-27 | Sps Technologies, Llc |
C9535-6-27 | Lockheed Martin Corporation |
AIC9535-6-27 | Sps Technologies, Llc |