NSN 5305-00-245-8796
High Torque Screw
Bearing surface of head grooved to 0.323 in. Min,0.325 in. Max dia,0.050 in. Min,0.055 in. Max from top of head.
Manufacturer part number 64040H4-24 for national stock number 5305002458796.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-245-8796.
-
MPN or Model
64040H4-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.352 inches and 0.402 inches -
Fastener Length
Between 1.862 inches and 1.892 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.412 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 59.75 degrees and 60.25 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-040-4705 MPN AIC210-2Socket Head Cap Screw
- 5305-01-048-1122 MPN AIC813-06R13Machine Screw
- 5305-01-057-3065 MPN BACB30ABP8-39AClose Tolerance Screw
- 5305-01-158-6763 MPN AIC944-3-16Machine Screw
- 5305-01-168-1202 MPN LE111-0041-2406Close Tolerance Screw
- 5305-01-215-0084 MPN AIC4043-3-06Machine Screw
- 5305-01-263-6160 MPN AIC985B3-5Close Tolerance Screw
- 5305-01-348-8660 MPN AIC4414-06-6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-245-8796 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
64040H4-24 | Sps Technologies, Llc |
HR101H4-24 | Hi-shear Corporation |
AIC1023H4-24 | Sps Technologies, Llc |
VT1039H4-24 | Alcoa Global Fasteners, Inc. |
CS318642H4-24 | Textron Fastening Systems |
HR101H4-24 | Lisi Aerospace Canada Corp |
C387H4-24 | Lockheed Martin Corporation |
64040H4-24 | Sps Technologies Inc |