NSN 5305-01-054-6243
High Torque Screw
1.495 inches fastener length, between 0.4360 inches and 0.4370 inches grip diameter, offset cruciform (torque set) internal drive style, thread diameter: 0.438 inches.
Manufacturer part number 121754-7-13 for national stock number 5305010546243.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6243.
-
MPN or Model
121754-7-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.668 inches and 0.698 inches -
Fastener Length
1.495 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-005-0623 MPN 51B221-40Close Tolerance Screw
- 5305-00-080-0152 MPN 3MA334CFA5Machine Screw
- 5305-00-310-6033 MPN AIC813-04R5Machine Screw
- 5305-00-311-9361 MPN AIC822-04-6Socket Head Cap Screw
- 5305-00-761-1263 MPN 51B223-57HMachine Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
- 5305-01-138-2658 MPN AIC940-4-9Machine Screw
- 5305-01-263-5618 MPN 3M963-4L3Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6243 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121754-7-13 | Sps Technologies, Llc |
VT1696-7-13 | Alcoa Global Fasteners, Inc. |
PBF1198-7-13 | Sps Technologies, Llc |
C9535-7-13 | Sps Technologies, Llc |
C9535-7-13 | Arconic Global Fasteners & Rings, |
C9535-7-13 | Sps Technologies, Llc |
C9535-7-13 | Lockheed Martin Corporation |
AIC9535-7-13 | Sps Technologies, Llc |
SF120-7-13 | Saturn Fasteners Inc |
C9535-7-13 | Pilgrim Screw Corporation |