NSN 5305-01-054-6244
High Torque Screw
Conical bearing surface of head 99.0 degree to 101.0 degree included angle 0.077 in. Long.
Manufacturer part number 121754-7-14 for national stock number 5305010546244.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6244.
-
MPN or Model
121754-7-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.668 inches and 0.698 inches -
Fastener Length
1.558 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.605 inches and 0.625 inches -
Head Height
Between 0.112 inches and 0.125 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Aircraft, f-16 -
Thread Diameter
0.438 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-012-2012 MPN AIC812-04-12Machine Screw
- 5305-01-016-1549 MPN 811C00-7Machine Screw
- 5305-01-135-6490 MPN HT4025L-4-14Close Tolerance Screw
- 5305-01-284-7158 MPN AIC985-5-22Close Tolerance Screw
- 5305-01-284-7160 MPN AIC985-5-29PClose Tolerance Screw
- 5305-01-495-9257 MPN TX1027C3-3AClose Tolerance Screw
- 5305-01-646-1479 MPN JSFB16V4-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6244 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121754-7-14 | Sps Technologies, Llc |
C9535-7-14 | Sps Technologies, Llc |
PF1198-7-14 | Sps Technologies, Llc |
C9535-7-14 | Lockheed Martin Corporation |
AIC9535-7-14 | Sps Technologies, Llc |
VT1696-7-14 | Alcoa Global Fasteners, Inc. |