NSN 5305-01-054-6271
High Torque Screw
Between 0.826 inches and 0.856 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number AIC985-4-7 for national stock number 5305010546271.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6271.
-
MPN or Model
AIC985-4-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.378 inches and 0.428 inches -
Fastener Length
Between 0.826 inches and 0.856 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-091-5053 MPN 51B222-4Close Tolerance Screw
- 5305-01-015-6646 MPN HT4025L3-3Close Tolerance Screw
- 5305-01-076-6318 MPN 51B581-5-22HClose Tolerance Screw
- 5305-01-103-8820 MPN HT4068-4-9AClose Tolerance Screw
- 5305-01-135-4125 MPN 3M933-4-11Machine Screw
- 5305-01-370-9398 MPN AIC1198-3-11Machine Screw
- 5305-01-381-0914 MPN AIC9535-6-31Close Tolerance Screw
- 5305-01-591-0195 MPN HT4027-7-12MClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-054-6271 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC985-4-7 | Sps Technologies, Llc |
121558-4-A7P | Sps Technologies, Llc |
VT1694F4-7 | Alcoa Global Fasteners, Inc. |
PBF1166-4-7 | Sps Technologies, Llc |
C7985-4-7 | Lockheed Martin Corporation |
AIC985-4-7P | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)