NSN 5305-01-054-6277
High Torque Screw
Between 0.667 inches and 0.697 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number C7984-4-5 for national stock number 5305010546277.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6277.
-
MPN or Model
C7984-4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
Between 0.667 inches and 0.697 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-524-1195 MPN 30-277-5Mat Aircraft Collar
- 5305-00-197-6204 MPN NAS1101-04-5BMachine Screw
- 5305-00-460-4669 MPN AIC792-4-2Close Tolerance Screw
- 5305-00-487-5081 MPN AIC793-4-10Close Tolerance Screw
- 5305-01-063-2356 MPN BACB30LK3U3Close Tolerance Screw
- 5305-01-095-5706 MPN AIC870-3-8Socket Head Cap Screw
- 5305-01-113-9695 MPN AIC813-3-R8Machine Screw
- 5305-01-158-5372 MPN AIC940-3-12Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6277 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C7984-4-5 | Sps Technologies, Llc |
C7984-4-5 | Arconic Global Fasteners & Rings, |
C7984-4-5 | Huck International, Inc. |
C7984-4-5 | Sps Technologies, Llc |
C7984-4-5 | Sps Technologies, Llc |
C7984-4-5 | Sps Technologies, Llc |
121557-4A5P | Sps Technologies, Llc |
AIC984-4-5 | Sps Technologies, Llc |
PBF1165-4-5 | Sps Technologies, Llc |
121557-4-5P | Sps Technologies, Llc |
C7984-4-5 | Lockheed Martin Corporation |
AIC984-4-5P | Sps Technologies, Llc |
VT1693F4-5 | Alcoa Global Fasteners, Inc. |