NSN 5305-01-109-1350
High Torque Screw
Between 3.216 inches and 3.246 inches fastener length, flat countersunk head style, between 0.852 inches and 0.933 inches head diameter, grip diameter: between 0.6230 inches and 0.6240 inches .
Manufacturer part number AIC985-10-36R for national stock number 5305011091350.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-109-1350.
-
MPN or Model
AIC985-10-36R
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.956 inches and 1.006 inches -
Fastener Length
Between 3.216 inches and 3.246 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.852 inches and 0.933 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.625 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2678 MPN LS15262V4-10Machine Screw
- 5305-00-826-9971 MPN SK2015-703Machine Screw
- 5305-01-054-6237 MPN AIC9535-6-21Close Tolerance Screw
- 5305-01-133-4474 MPN HT4024L3-20Close Tolerance Screw
- 5305-01-189-8430 MPN AIC954-3Setscrew
- 5305-01-221-4196 MPN AIC583-039Socket Head Cap Screw
- 5305-01-259-9764 MPN AIC984-3-5RClose Tolerance Screw
- 5305-01-298-1299 MPN AIC984B3-14Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-109-1350 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC985-10-36R | Sps Technologies, Llc |
C7985-10-36P | Lockheed Martin Corporation |
121558-10-36P | Sps Technologies, Llc |
VT1694-10-36P | Alcoa Global Fasteners, Inc. |
PBF1166-10-36P | Sps Technologies, Llc |
C7985-10-36 | Arconic Global Fasteners & Rings, |
C7985-10-36 | Huck International, Inc. |
PBF1166-10-36R | Sps Technologies, Llc |
121558-10-36X | Sps Technologies, Llc |
VT1694-10-36R | Alcoa Global Fasteners, Inc. |
C7985-10-36R | Lockheed Martin Corporation |
AIC985-10-36 | Sps Technologies, Llc |
AIC985-10-36P | Sps Technologies, Llc |