NSN 5305-01-054-6282
High Torque Screw
Between 1.222 inches and 1.372 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number AIC986-6-11 for national stock number 5305010546282.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6282.
-
MPN or Model
AIC986-6-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.644 inches and 0.674 inches -
Fastener Length
Between 1.222 inches and 1.372 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-726-1242 MPN AIC813-01-7Machine Screw
- 5305-00-840-5962 MPN A1C617-1Externally Relieved Body Screw
- 5305-01-025-6412 MPN AIC812-08-4Machine Screw
- 5305-01-170-4571 MPN BACB30LK2-4Close Tolerance Screw
- 5305-01-381-2281 MPN 1701-4-13Close Tolerance Screw
- 5305-01-435-5829 MPN BACB30LU8-54Close Tolerance Screw
- 5305-01-530-5415 MPN AIC813-08R19Machine Screw
- 5305-01-591-0080 MPN HT4027-10-10Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6282 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC986-6-11 | Sps Technologies, Llc |
121711-6-11 | Sps Technologies, Llc |
VT1695-6-11 | Alcoa Global Fasteners, Inc. |
H186-6-11 | Huck International, Inc. |
PBF1196-6-11 | Sps Technologies, Llc |
C7986-6-11 | Arconic Global Fasteners & Rings, |
VT695-6-11 | Arconic Global Fasteners & Rings, |
C7986-6-11 | Sps Technologies, Llc |
C7986-6-11 | Lockheed Martin Corporation |