NSN 5305-01-054-6291
High Torque Screw
Between 0.855 inches and 0.885 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number PBF1165-4-8 for national stock number 5305010546291.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-054-6291.
-
MPN or Model
PBF1165-4-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.395 inches -
Fastener Length
Between 0.855 inches and 0.885 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-609-7485 MPN 100-161-5-2Materi Aircraft Pin
- 5305-00-316-6848 MPN AIC811-06-5Socket Head Cap Screw
- 5305-00-505-2802 MPN LS15267V3-50Machine Screw
- 5305-00-709-2013 MPN AIC813-4-R10Machine Screw
- 5305-00-817-4592 MPN NAS1101-06-6Machine Screw
- 5305-01-054-6271 MPN AIC985-4-7PClose Tolerance Screw
- 5305-01-056-4220 MPN 986-10-52Close Tolerance Screw
- 5305-01-059-1956 MPN BACB30LU4-32Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-054-6291 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1165-4-8 | Sps Technologies, Llc |
121557-4-A8P | Sps Technologies, Llc |
VT1693F4-8 | Alcoa Global Fasteners, Inc. |
C7984-4-8 | Arconic Global Fasteners & Rings, |
C7984-4-8 | Huck International, Inc. |
H044-4-8 | Huck International, Inc. |
C7984-4-8 | Sps Technologies, Llc |
AIC984-4-8 | Sps Technologies, Llc |
C7984-4-8 | Lockheed Martin Corporation |