NSN 5305-01-055-3803
High Torque Screw
1.745 inches fastener length, between 0.4360 inches and 0.4370 inches grip diameter, offset cruciform (torque set) internal drive style, thread diameter: 0.438 inches.
Manufacturer part number 121754-7-17 for national stock number 5305010553803.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-055-3803.
-
MPN or Model
121754-7-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.668 inches and 0.698 inches -
Fastener Length
1.745 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.438 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-621-9116 MPN BACB30ZE4-9Bolt C771 Nrp
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-01-027-2006 MPN HT4020-4-10AClose Tolerance Screw
- 5305-01-050-9002 MPN AIC984-7-16PClose Tolerance Screw
- 5305-01-054-6265 MPN AIC985-4-12Close Tolerance Screw
- 5305-01-128-4098 MPN AIC984-5-12Close Tolerance Screw
- 5305-01-241-1522 MPN ST3M652C5-12AClose Tolerance Screw
- 5305-01-332-7155 MPN 1701-3-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-055-3803 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121754-7-17 | Sps Technologies, Llc |
PBF1198-7-17 | Sps Technologies, Llc |
121754-7-17 | Sps Technologies, Llc |
AIC9535-7-17 | Sps Technologies, Llc |
SC1776-7-17 | Arconic Global Fasteners & Rings, |
C9535-7-17 | Lockheed Martin Corporation |
VT1696-7-17 | Alcoa Global Fasteners, Inc. |
5C1776-7-17 | Arconic Global Fasteners & Rings, |
C9535-1-17 | Sps Technologies, Llc |