NSN 5305-01-059-1953
High Torque Screw
Between 2.222 inches and 2.252 inches fastener length, flat countersunk head style, between 0.455 inches and 0.510 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number BACB30LU4-29 for national stock number 5305010591953.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-059-1953.
-
MPN or Model
BACB30LU4-29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 2.222 inches and 2.252 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.455 inches and 0.510 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 1.802 inches and 1.822 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-435-3875 MPN BACB30LU7-37Close Tolerance Screw
- 5306-01-025-6435 MPN VAL23029-4-13Close Tolerance Bolt
- 5306-01-043-7711 MPN VAL22034-4G15Shear Bolt
- 5306-01-135-4137 MPN VCC0090-5-16Shear Bolt
- 5306-01-183-6984 MPN VCG0002-5-10Close Tolerance Bolt
- 5306-01-330-9782 MPN VAL23602-7D009Close Tolerance Bolt
- 5306-01-351-5517 MPN VCG0017-10D34Shear Bolt
- 5306-01-371-3631 MPN VFK600-8-36Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-059-1953 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LU4-29 | The Boeing Company |
BACB30LU4-29 | Valley-todeco, Inc. |
BACB30LU4-29 | Sps Technologies, Llc |
BACB30LU4-29 | Arconic Global Fasteners & Rings, |
BACB30LU4-29 | Huck International, Inc. |
BACB30LU4-29 | Federal Manufacturing Corporation |
BACB30LU4-29 | Arconic Global Fasteners & Rings, |
BACB30LU4-29 | Sps Technologies, Llc |
BACB30LU4-29 | Alcoa Global Fasteners, Inc. |
BACB30LU4-29 | Voi-shan/chatsworth |
BACB30LU4-29 | Sps Technologies, Llc |
BACB30LU4-29 | Huck Intl Inc |