NSN 5305-01-059-4881
High Torque Screw
Between 1.423 inches and 1.453 inches fastener length, flat countersunk head style, between 0.573 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number VT1693F5-16 for national stock number 5305010594881.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-059-4881.
-
MPN or Model
VT1693F5-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.413 inches and 0.463 inches -
Fastener Length
Between 1.423 inches and 1.453 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.573 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-395-3456 MPN HT4024L5-9-1Close Tolerance Screw
- 5305-00-913-0580 MPN 6-74282-1Machine Screw
- 5305-01-110-7881 MPN NAS1101E02-18Machine Screw
- 5305-01-197-6515 MPN LE111-0035-6309Close Tolerance Screw
- 5305-01-357-6952 MPN AIC1701-4-4Hexagon Head Cap Screw
- 5305-01-357-7724 MPN AIC4463-3-48Machine Screw
- 5305-01-381-2281 MPN 1701-4-13Close Tolerance Screw
- 5305-01-435-6397 MPN AIC1515-3-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-059-4881 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VT1693F5-16 | Alcoa Global Fasteners, Inc. |
H044-5-16 | Huck International, Inc. |
VT1693F5-16 | Arconic Global Fasteners & Rings, |
121557-5-A16P | Sps Technologies, Llc |
AIC984-5-16 | Sps Technologies, Llc |
PBF1165-5-16 | Sps Technologies, Llc |
121557-5-A16P | Sps Technologies, Llc |
VT1693F5-16 | Huck International, Inc. |
C7984-5-16 | Lockheed Martin Corporation |
AIC984-5-16P | Sps Technologies, Llc |
C7984-5-16 | Arconic Global Fasteners & Rings, |