NSN 5305-01-066-9816
High Torque Screw
6.219 inches fastener length, flat countersunk head style, 0.630 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number NAS335CP61 for national stock number 5305010669816.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-066-9816.
-
MPN or Model
NAS335CP61
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
6.219 inches -
Head Style
Flat countersunk -
Head Diameter
0.630 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.047 inches first hole -
Single Shear Strength
7300 pounds per square inch -
Thread Diameter
0.312 inches -
Grip Length
5.688 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
6.047 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-2672 MPN NAS1063E3-551UTerminal Board Marker Strip
- 5940-01-384-3992 MPN NAS1063A2TB107UTerminal Board Marker Strip
- 5305-00-051-4496 MPN MS51973-18Setscrew
- 5305-00-059-8244 MPN MS35214-19Machine Screw
- 5305-00-066-7327 MPN MS24693-C28Machine Screw
- 5305-00-067-9849 MPN MS24693-S121Machine Screw
- 5305-00-068-9167 MPN MS35202-73Machine Screw
- 5305-00-108-0882 MPN NAS514P1032-22PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-066-9816 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS335CP61 | National Aerospace Standards |