NSN 5305-01-071-0866
High Torque Screw
Between 0.615 inches and 0.635 inches fastener length, between 0.1890 inches and 0.1895 inches grip diameter, 0.190 inches thread diameter, grip length: between 0.140 inches and 0.150 inches .
Manufacturer part number 9155M23P03 for national stock number 5305010710866.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-071-0866.
-
MPN or Model
9155M23P03
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.480 inches -
Fastener Length
Between 0.615 inches and 0.635 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.140 inches and 0.150 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Nickel alloy -
Material Specification
C50tf13 cl b mfr ref single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-840-5962 MPN AIC617-1Externally Relieved Body Screw
- 5305-01-183-8740 MPN 3M964-4-3Close Tolerance Screw
- 5305-01-329-9736 MPN 03A174-4-15Close Tolerance Screw
- 5305-01-412-5356 MPN LD111-0045-2516Close Tolerance Screw
- 5305-01-417-2495 MPN TX1027D4-20Close Tolerance Screw
- 5305-01-418-7402 MPN AIC1651-4-16Close Tolerance Screw
- 5305-01-465-2407 MPN TX1027V4-12AClose Tolerance Screw
- 5305-01-505-3998 MPN TX1024C3-4-5AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-071-0866 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9155M23P03 | General Electric Company |
9155M23P03 | Sps Technologies, Llc |
9155M23P03 | Arconic Global Fasteners & Rings, |
9155M23P03 | Alcoa Global Fasteners, Inc. |
9155M23P03 | Acufast Aircraft Products Inc. |
9155M23P03 | Sps Technologies, Llc |