NSN 5305-01-074-7270
High Torque Screw
0.519 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.2016 inches and 0.2026 inches .
Manufacturer part number 66908H3-3 for national stock number 5305010747270.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-074-7270.
-
MPN or Model
66908H3-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.331 inches -
Fastener Length
0.519 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.2016 inches and 0.2026 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mac ps-13145 fscm 76301 mfr ref all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-100-6311 MPN 67077-5-8Close Tolerance Screw
- 5305-00-143-9574 MPN NAS1101-08H22Machine Screw
- 5305-00-316-7377 MPN HT4025L4-4Close Tolerance Screw
- 5305-00-544-2975 MPN HT4024L5D17Close Tolerance Screw
- 5305-00-934-9873 MPN 202-15523-3-7Machine Screw
- 5305-01-032-5377 MPN 54268-5-16Shoulder Screw
- 5305-01-054-6266 MPN 121558-4-A13PClose Tolerance Screw
- 5305-01-082-0150 MPN 64494-3-6Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-074-7270 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
66908H3-3 | Sps Technologies, Llc |
66908H3-3 | Sps Technologies, Llc |