NSN 5305-01-074-9045
High Torque Screw
1.217 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3266 inches and 0.3276 inches .
Manufacturer part number 66908H5-12 for national stock number 5305010749045.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-074-9045.
-
MPN or Model
66908H5-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.467 inches -
Fastener Length
1.217 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3266 inches and 0.3276 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mac ps-13145 fscm 76301 mfr ref all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-815-4327 MPN 32-33027-43Shoulder Screw
- 5305-01-043-4301 MPN HT8043-5-10Close Tolerance Screw
- 5305-01-143-1753 MPN HT4009-4-17Shoulder Screw
- 5305-01-268-5961 MPN HT4020-4-12XShoulder Screw
- 5305-01-339-0223 MPN BACB30NT4K5Close Tolerance Screw
- 5305-01-435-6397 MPN SC5063-3-5Close Tolerance Screw
- 5305-01-452-3162 MPN 3M707-3-9-4Close Tolerance Screw
- 5305-01-462-2842 MPN TX1026V5-8AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-074-9045 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
66908H5-12 | Sps Technologies, Llc |
66908H5-12 | Sps Technologies, Llc |
ST3M559-5-12 | Arconic Global Fasteners & Rings, |
HS2623-5-12 | Huck International, Inc. |
ST3M559-5-12 | Sps Technologies, Llc |
ST3M559-5-12 | Hi-shear Corporation |
ST3M559-5-12 | Lisi Aerospace Canada Corp |
ST3M559-5-12 | Boeing Company, The |
HT307-5-12 | Foster Bros Mfg Co |
HS2623-5-12 | Huck Intl Inc |
ST3M559-5-12 | Grimes Aerospace Co |
ST3M559-5-12 | Alcoa Global Fasteners, Inc. |